Our PDU can treat:

  • ODS (Ozone Depleting Substances)
  • POP's (Persistent Organic Pollutants)
  • PCB's (Polychlorinated Biphenyls)
  • CFC's (Chlorofluorocarbons)

Compare Waste Treatment Technologies

As an aid in helping you assess whether Plascon is the best solution to suit your waste treatment needs, the table below provides a quick reference for comparison of the most common waste treatment technologies in the marketplace. The most important characteristics of Plascon, high temperature incineration gas phase chemical reduction, base catalysed dechlorination, cement kilns and thermal oxidation are outlined.

There are of course many other factors to consider such as capital and operational costs, regulatory approval in your jurisdiction, community perception and implementation time and we would be happy to discuss your particular situation and provide an obligation free assessment.

 Feature Plascon Gas Phase Chemical Reduction High Temperature Incinerator Base Catalysed Dechlorination Cement Kiln Thermal Oxidation
Destruction Temperature > 3000°C Approximately 850°C > 1100°C Approximately 320°C > 1500°C < 1100°C
Destruction Efficiency (DE) > 99.9999% N/A,
DRE > 99.9999%  *
  99.99%  99.9% N/A,
DRE > 99%  *
 N/A,
DRE > 99.99%  *
Suitable for Destruction of Persistent Organic Pollutants (POPs) in oil            
Suitable for Destruction of pure Persistent Organic Pollutants (POPs)            
Suitable for Destruction of Green House Gasses (GHGs) and Ozone Depleting Substances (ODSs)            
Suitable for Destruction of Solid Wastes  **  **    **    **
Continuous Process            
Capable of rapid start-up and shut-down            
Can be located adjacent to source of waste            
Does not need additional scrubbing system to eliminate Dioxin and Furan emissions            
Inherently safe in event of power failure or equipment failure            


*   Destruction Efficiency figures Not Available, Destruction Removal Efficiency (DRE) provided
** After appropriate pre-processing